Product Highlights:
Plunge Base |
|
Converts almost any rotary tool into a miniature plunge router |
|
Low-slung grips and a 4"x3" footprint make it easy to position |
|
Cutaway in side shows the position of the blade |
|
Depth of cut is controlled with a stop post with a micro-adjust screw |
|
Grooves near base allow for excellent control |
|
Made largely from aluminum with stainless rods and knobs |
|
Fits onto the 3/4-12 threaded collar found on most rotary tools |
|
Made in Canada |
|
|
Fence and Center Kit |
|
Available separately, lets you use the edge of a workpiece as a reference when making cuts, and can also be set to accurately guide the tool when cutting arcs or circles |
|
Includes two straight fences made of torrefied maple (both 6" long, one 1-1/2" wide and the other 5/8" wide for thin stock), a pair of curve guides, a circle head with three interchangeable centers (sharp pin, 1/4" post and flat disk) and a pair of 6" fence rods |
|
6" rods allow offsets from zero to 4-1/2" with the straight fences and diameters from 1/2" to
17-1/2" with the circle head |
|
Made in Canada |
|
|
Precision Adjuster |
|
The optional precision adjuster clamps to the fence rods and attaches to the fence holder or circle head, letting you fine-tune their settings with a thumbscrew |
|
Made in Canada |
|
|
Base Light Attachment |
|
Optional task light accessory mounts on the base to illuminate the bit directly, making it easier to see where you're cutting. Can be attached at four different points on the plunge base using a stainless-steel thumbscrew |
|
|
|
|
|
|
Product # |
Description |
05J65.01 |
Veritas®Plunge Base for Rotary Tools |
05J65.03 |
Fence and Center Kit |
05J65.05 |
Precision Adjuster |
05J65.11 |
Task Light |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |